Call us: 1300 735 949

LX Series 2




Features

  • The Stainless Steel Advantage
  • Contemporary Range of Colours
  • Save on Energy Costs
  • Government Incentives and Rebates

Edwards LX Series 2

For areas which experience frost or snow and perhaps have less than reliable water quality, the Edwards LX Series 2 system is the only choice. It uses the highly efficient heat transferring properties of a special anti-freeze fluid to transfer the absorbed energy to heat the water indirectly. With an ‘indirect system’ water does not pass through the collector panels, instead the anti freeze mixture is circulated from the collectors through a stainless steel heat exchanger, transferring the heat into the water.

The benefit of this ‘indirect’ heat exchange process is that the system can be used confidently in frost areas, without risking damage to the system; it offers protection against freeze damage in conditions of up to minus 8 degrees Celcius.

The new modern design of the LX Series 2 system was designed and manufactured right here in Australia for our harsh Australian conditions, not only will it complement any home’s roof and save you immediately on your home’s energy costs, it offers you peace of mind knowing it has been developed to last for years in our tough climate.


Specifications

LX Series 2 Systems Frost Areas Water Quality Warranty Solar Contribution Area Low Solar Contribution Area Medium Solar Contribution Area High
Australis 2 Suitable Wide Range 6 years* Not Suitable Suitable Suitable
Titan 2 Suitable Wide Range 10 years* Suitable Suitable May require additional over temperature protection
Storage Cylinder Units LX180 LX305 LX440
Capacity Litres / US Gal 177/47 294/73 429/113
Outside Dimensions mm 571 x 1215 571 x 1905 571 x 2700
Weight – Full kg/lbs 237/522 378/833 545/1201
Weight – Empty kg/lbs 60/132 84/185 116/256
Max Inlet Pressure kPa/psi 550/80 550/80 550/80
Insulation – Thickness mm/in 47/1.85 47/1.85 47/1.58
Total System
Dimensions – Area on roof mm 2562 x 1615 2562 x 2494 2562 x 3581
No. of Collectors (Typical) 1 2 3
Weight – Full kg/lbs 277/611 455/1003 659/1453
Weight – Empty kg/lbs 98/216 157/346 225/496
Australis 2 Collecter
Apreture (heating) area m2 1.86 ft2 20
Dimensions – Length mm 1941 in 76.5
Width mm 1027 in 40.5
Height mm 84 in 3.3
Capacity litres 1.8 US gal 0.5
Weight – empty kg 35 lbs 77.2
Full kg 36.8 lbs 81.1
Max Pressure kPa 1000 psi 145
Absorber surface Black polyester powder coat Black polyester powder coat Black polyester powder coat Black polyester powder coat
Absorber material Aluminium Aluminium Aluminium Aluminium
Riser material Copper Tube Copper Tube Copper Tube Copper Tube
Number of risers 6 6 6 6
Titan 2 Collector
Apreture (heating) area m2 1.86 ft2 20
Dimensions – Length mm 1941 in 76.5
Width mm 1027 in 40.5
Height mm 84 in 3.3
Capacity litres 1.6 US gal 0.4
Weight – empty kg 33.6 lbs 75
Full kg 35.2 lbs 76.6
Max Pressure kPa 1000 psi 145
Absorber surface Blue TiNOX Sputtered Blue TiNOX Sputtered Blue TiNOX Sputtered Blue TiNOX Sputtered
Absorber material Copper Copper Copper Copper
Riser material Copper Tube Copper Tube Copper Tube Copper Tube
Number of risers 7 7 7 7