Flat Panel Edwards LX Series 2 LX Series 2
Features
- The Stainless Steel Advantage
- Contemporary Range of Colours
- Save on Energy Costs
- Government Incentives and Rebates
Edwards LX Series 2
For areas which experience frost or snow and perhaps have less than reliable water quality, the Edwards LX Series 2 system is the only choice. It uses the highly efficient heat transferring properties of a special anti-freeze fluid to transfer the absorbed energy to heat the water indirectly. With an 'indirect system' water does not pass through the collector panels, instead the anti freeze mixture is circulated from the collectors through a stainless steel heat exchanger, transferring the heat into the water.
The benefit of this 'indirect' heat exchange process is that the system can be used confidently in frost areas, without risking damage to the system; it offers protection against freeze damage in conditions of up to minus 8 degrees Celcius.
The new modern design of the LX Series 2 system was designed and manufactured right here in Australia for our harsh Australian conditions, not only will it complement any home's roof and save you immediately on your home's energy costs, it offers you peace of mind knowing it has been developed to last for years in our tough climate.
Specifications
| LX Series 2 Systems | Frost Areas | Water Quality | Warranty | Solar Contribution Area Low | Solar Contribution Area Medium | Solar Contribution Area High |
|---|---|---|---|---|---|---|
| Australis 2 | Suitable | Wide Range | 6 years* | Not Suitable | Suitable | Suitable |
| Titan 2 | Suitable | Wide Range | 10 years* | Suitable | Suitable | May require additional over temperature protection |
| Storage Cylinder | Units | LX180 | LX305 | LX440 |
|---|---|---|---|---|
| Capacity | Litres / US Gal | 177/47 | 294/73 | 429/113 |
| Outside Dimensions | mm | 571 x 1215 | 571 x 1905 | 571 x 2700 |
| Weight - Full | kg/lbs | 237/522 | 378/833 | 545/1201 |
| Weight - Empty | kg/lbs | 60/132 | 84/185 | 116/256 |
| Max Inlet Pressure | kPa/psi | 550/80 | 550/80 | 550/80 |
| Insulation - Thickness | mm/in | 47/1.85 | 47/1.85 | 47/1.58 |
| Total System | ||||
| Dimensions - Area on roof | mm | 2562 x 1615 | 2562 x 2494 | 2562 x 3581 |
| No. of Collectors (Typical) | 1 | 2 | 3 | |
| Weight - Full | kg/lbs | 277/611 | 455/1003 | 659/1453 |
| Weight - Empty | kg/lbs | 98/216 | 157/346 | 225/496 |
| Australis 2 Collecter | | | | |
|---|---|---|---|---|
| Apreture (heating) area | m2 | 1.86 | ft2 | 20 |
| Dimensions - Length | mm | 1941 | in | 76.5 |
| Width | mm | 1027 | in | 40.5 |
| Height | mm | 84 | in | 3.3 |
| Capacity | litres | 1.8 | US gal | 0.5 |
| Weight - empty | kg | 35 | lbs | 77.2 |
| Full | kg | 36.8 | lbs | 81.1 |
| Max Pressure | kPa | 1000 | psi | 145 |
| Absorber surface | Black polyester powder coat | Black polyester powder coat | Black polyester powder coat | Black polyester powder coat |
| Absorber material | Aluminium | Aluminium | Aluminium | Aluminium |
| Riser material | Copper Tube | Copper Tube | Copper Tube | Copper Tube |
| Number of risers | 6 | 6 | 6 | 6 |
| Titan 2 Collector | | | | |
|---|---|---|---|---|
| Apreture (heating) area | m2 | 1.86 | ft2 | 20 |
| Dimensions - Length | mm | 1941 | in | 76.5 |
| Width | mm | 1027 | in | 40.5 |
| Height | mm | 84 | in | 3.3 |
| Capacity | litres | 1.6 | US gal | 0.4 |
| Weight - empty | kg | 33.6 | lbs | 75 |
| Full | kg | 35.2 | lbs | 77.6 |
| Max Pressure | kPa | 1000 | psi | 145 |
| Absorber surface | Blue TiNOX Sputtered | Blue TiNOX Sputtered | Blue TiNOX Sputtered | Blue TiNOX Sputtered |
| Absorber material | Copper | Copper | Copper | Copper |
| Riser material | Copper Tube | Copper Tube | Copper Tube | Copper Tube |
| Number of risers | 7 | 7 | 7 | 7 |